Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   My first Watercooled Rig (http://forums.procooling.com/vbb/showthread.php?t=3837)

max007007 07-21-2002 11:41 AM
My first Watercooled Rig
 
Pump -> BIX -> C5 -> DD GF4 ->Airtrap -> Pump
Everything inside case

AXP 1900+ @ 1.76GHz (185x9.5) at 1.825V
(Check out my sig for full configuration)

Now case : 34°C
Idling : 34 - 36°C
Load : 45°C

http://homex.coolconnect.com/member3...s/DSCF0061.JPG
http://homex.coolconnect.com/member3...s/DSCF0058.JPG

decodeddiesel 07-21-2002 01:04 PM
Sweet work on the PC-70. That Natriumtech Bay Bus rocks big time. Do you know if it's possible to get them in the US?

imatation 07-21-2002 05:38 PM
Where did you get the parts for your airtrap? im trying to make one just like that, but cant find the pipe or fittings.

max007007 07-21-2002 09:24 PM
Quote:
Originally posted by decodeddiesel
Sweet work on the PC-70. That Natriumtech Bay Bus rocks big time. Do you know if it's possible to get them in the US?
Try their international Distributor.
http://www.reviewmakers.com/index.php?p=rmsales

max007007 07-21-2002 09:26 PM
Quote:
Originally posted by imatation
Where did you get the parts for your airtrap? im trying to make one just like that, but cant find the pipe or fittings.
I was lucky, the airtrap is made by Turbokeu.

Sanjuro 07-22-2002 12:05 AM
hehe, i knew i've seen that setup somewhere ;)

Pinkster 07-22-2002 02:47 AM
that a cyclone 5 i see there? if so.. sweet

max007007 07-22-2002 03:59 AM
Quote:
Originally posted by Pinkster
that a cyclone 5 i see there? if so.. sweet
yes, thats a C5.

max007007 08-05-2002 12:23 AM
Quote:
Originally posted by Sanjuro
hehe, i knew i've seen that setup somewhere ;)
:D

airspirit 08-06-2002 04:49 PM
Bump up your voltage (I think you may need to mod your board to get over 1.85V ... I think you use the HIP6301 controller) and you should be able to move your multiplier up to 10x, methinks. You'll probably have to jump the voltage to 1.95 and the voltage to your RAM up .1V. Your board/chipset should have no problem handling it.

bigben2k 08-06-2002 05:19 PM
Quote:
Originally posted by airspirit
Bump up your voltage (I think you may need to mod your board to get over 1.85V ... I think you use the HIP6301 controller) and you should be able to move your multiplier up to 10x, methinks. You'll probably have to jump the voltage to 1.95 and the voltage to your RAM up .1V. Your board/chipset should have no problem handling it.
Unless you have the new AMD core, in which case you might try being a little more carefull with the voltage bump, and keep it to a minimum.

nexxo 08-06-2002 05:28 PM
@ imatation:

Go to an aquarium shop. Find a sand filter for a fish tank. It is basically a res like in the picture filled with crystalline sand (the filtering medium). Dump the sand. Presto! Reservoir!


:D

bigben2k 08-06-2002 05:35 PM
Quote:
Originally posted by nexxo
@ imatation:
Go to an aquarium shop. Find a sand filter for a fish tank. It is basically a res like in the picture filled with crystalline sand (the filtering medium). Dump the sand. Presto! Reservoir!
:D
Also, you can pickup some foam/sponge. They should have some stuff that's open cell, with large cells. Stuff the res with it, and it'll help limit the splattering, without restricting the flow.


All times are GMT -5. The time now is 05:53 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...