1600+ 2 gig finally made it
 

finally got the 1600+ over two gig.

a little work involved and a switch to a tc4 and all is good

heres the pic

its a green agoia y 0213

http://www.cloaking-software.com/xp333raid/over2.jpg

this is the whole reason i got water thanks to all

Great OC...614 MHz!!!

How stable is that??? Looks a bit warm for that kind of driving, but that's still a nice temp for those watts.

My AGOIA 1700+/ Iwill XP333/ chiller would post over 2GHz, but locked up soon after. I ended up running at 1914 to stay 110% stable.

You have my hopes up though...I just bought an AGOIA 1600+ to replace it, and I'm setting the Iwill and chiller back up today.

I got a 1600 because he had just gotten a new shipment in that morning...figured I'd gamble on a good batch with a recent build. :)

no thats stable, i have to turn my ram timings down cause its limits out at 188-190 on cas 2

my temps from 1910-2014 stay the same

for daily stuff i run at 1970 (188*10.50)

i ran it 3 days at over 2 gig but got tired of the slower ram timings

I hear you...I had my old 1600+ AGOGA and Samsung PC2100 running 201 FSB on the Iwill for awhile...although only around 1650 MHz.

It was great for bragging, but the memory was way over-volted, and running at the failsafe timing. I could mem bench higher at 166 FSB and aggressive timing. :)

yeah the slow timings were good to test the cpu i figured now that i know twhat that does ill invest in better ram to go with it.


I havent unlocked the chip or i could work it all out with the multiplier but these damm green ones are giving me trouble unlocking

I've managed to unlock one out of three green ones...and it was a crappy unlock too. Good to hear, I thought I was just losing my touch. :)

I won't touch it until next week, after the 7 day return is up at the retailer...in case it if it dies for whatever reason over the next few days. the last thing I need is scratches on it when I take it back... acetone takes off everything but scratches :)

yeha the green ones are a bugger.

so far i can run the chip up to 193 fsb without unlocking, so really im not gonna bother.

i jsut need to get a little better mem, some thatll go up to 200 i figure that will lt me max out the chip fully

i dont think itll go beyone 195*10.5

i thought i was just losing my unlocking touch too:)

uh-oh...does this mean AMD is inching closer to permanently locked?

Holy Crap!!!!!!!!!

I don't have my water loop back together yet, tomorrow, but this thread has me itching.

I fired it up with a stock hsf:

XP1600+ AGOIA
AMD Retail HSF
Samsung PC2700

Post greets me with 2200+

1789 MHz @46 C idle...too scared to load it...hit 50C in 2 seconds, so I stopped.

10.5 x 171 (170.38:rolleyes: )

This little chip is gonna love the chiller.

Yeah theres no real need to unlock they seem to let the fsb go as high as you want iff you got the cooling.

agoia y 0213


are the hottest ones out
i also had an agoia 4 that was pretty good