water performance question
 

hey guys just got my web medic setup going.

not sure if the results are good, just dont know enough

My cpu is consistently 10-11 degrees celcius over case temp

granted thats on a 600 mhz oc - 1400mhz at 1990mhz so keep that in mind


I went res-rad-wb kinda curious if that was a decent way to go, im not sure if pushing the water through the rad was right, but i figured that water right outta the rad to the block might be the way to go just not sure bout if that hurts flow enough to negate the whole thing.


more specs submerged via 1300-tc-4-6 inch rad/shroud combo 1/2 tubing.

basicaly is the 10-11 degree C difference decent?

what radiator is it? what CPU voltage?

im guessing the standard chevvette and its 2 volts

im happy with the performance i was getting the same temps when i was sucking air outta the crawl space with my old setup

not bad, if your case temp is actually the ambient air temp going through the radiator... though I would expect the case temp to ba a tad above ambient temp though.

Do you have a way to measure the Liquid temp in you system, just as it is to enter the block, that would give you a better indication of how well your rig running...