Chieftec case mounting plate for PSU
 

Following this thread

If you're looking to mount a PSU horizontally in that Chieftec Dragon case, you can get a mounting plate here , as it has been stated here

(I'm still not affiliated with them!)

I dont know if you had me in mind or not ben, but the bracket i was talking about is not the mounting plate. Its a support bracket for the PSU, it mounts right under the PSU on the SX1240 case.


take a peek here if you want to know what i mean...

http://nixon.thermodust.com/images/case/lightstwo.jpg

the second hole on the cross bar is where it screws in, and since i have a WTX PSU it dips, and is bending the bracket you posted a link to.

and to make it better, antec told me they cant get me the bracket no matter what i do, I have to buy another case if i want it. lol

Yeah, I did have you in mind. Oh well... buyer beware, you may or may not get that bracket, depending on the color of the case you get (at Directron, at least).

Neos, I have that bracket, and I wrote an email to you seeing if you wanted me to ship it COD (cost of shipping). Email me at my procooling handle @ hotmail if you're interested. With my WC setup, it is impossible to fit it in my case, and I'll never use it. If you want to pay shipping for it, you can have it ... you'll just have to sacrifice a virgin heifer (MUST be all white, all black, or teal green with little pink speckles) in my name, though.

i sent a reply to the addy you emailed me from air, but i never got a response, figured it was the weekend and you had stuff to do :)


and thanks ben, cause i am actually going to need to buy that plate anyway, the powdercoat on my current plate got into a screw thread, and as i was putting a screw in, it stripped off the head, and left the shaft in, when i drilled it out i screwed up and drilled out part of the thread :(


and will do air, i'll go looking for that cow this weekend :)