Maxi Jet MJ1000, is it good!?
 

I got this pump but I didnt install it jet. Will it be enugh for my system!? I have custom made CPU block and soon I will have GPU block too. Curently I am running Eden 128 submerble pump.
What do you think about this Maxi Jet!?


BDW Hellp everyone, this is my first post!

Similar thread here : http://forums.procooling.com/vbb/sho...&threadid=4378
But to answer the q. I own that pump (two) and they work great.
Welcome to Pro Cooling

There is thread I know, but just about MJ1200 not MJ1000!
And should this one be good or I should put 2 serial!?

Yeah but in restrictive system like watercooling real performance would be almost the same, preasure output of 1000 and 1200 pump are almost the same, this is the data to look for not so much the flow rate. For starters one will be enough, also depends on what are you cooling. I have axp at 1950Mhz @2.1 V 24/7 and north bridge waterblock and I had (now back to Ve-mil for rma) radeon 8500 watercooled, so I need good flow rate to cool everything very well, so I use two 1000 l/h models

Doh, i didnt noticed that you are from Slovenia!!!
I have unlocked AXP 2000+ at 1980MHz 2V, and I will get new GPU block soon for my Leadtek Ti4400 on my Epox 8K3A+. Probabbly I will use Y splitters for conecting CPU/GPU block paralell not serial!!!

BDW is there any water cooling or case modding stores in Slovenia because here in Croatia there is no single on!!!

Well, there are some that sells few goodies like case windows, cold cathode... stuff like that also two wb Swiftech and Magnum but everything is qute expensive.
But I'm in the process of starting business of making waterblocks of all kind, and I'm confident that my products will outperform most stuff out there.
Here is some of my work:
http://forums.procooling.com/vbb/sho...&threadid=3211
http://forums.procooling.com/vbb/sho...&threadid=3617

Btw. I'll show new Gf4 prototype water block (gpu+ddr) when I'll go to and try to break (well I pretty sure :D ) amdxp/4200 3dmark record with 10°C water on cpu and gpu, everything voltmoded

Tons of others pics on that link in my sig.

And you don't wanna use Y spliters for cpu and gpu. You need all the flow you can have on cpu, just put gpu block after cpu, and don't think that gpu will get much hoter water in the block (that what most people think) well let me tell you I have temp probe in inlet and outlet of cpu block and the difference is 0.1°C so minimal, of course this is the function of the flow rate, so bigger flow lower deltaT between inlet and outlet.

Are you selling your blocks!?
And if you do can you ship in Croatia because you have some really intresting things that I would like to try!?

Yeah I do, no problem with shipping too . If Ve-mil will get me new graphic card, I'll come to Zagreb to pick it up, so If you're near, I can get you blocks in person so you'll have no problem with custom and shipping.
Email me with detail, you can write croatian, I understand (maybe my writing is a little rusted) as my father was from Dalmatia :D

LOL!
I live in Dalmatia, MAKARSKA!!
And about shiiping, you would send it by post or something else!?

This is what I have done with 1.4 T-bird and my first block without pelts and such things:
http://v-i-r-u-s.50megs.com/1800.jpg

Stabile 3dMark on 1770MHz:
http://service.madonion.com/compare?2k1=4077085

Now that little T-bird is dead because i spilled some AS3 over bridges and bye bye my friend!!

morphling,
the point is that I need best block you can make, that I can get on top 10 AXP/Ti4400 combos like I was with my T-bird!!

:D
Nice Oc. on Tb.
I would ship with regular mail to cut down the costs.
Ahh fellow 3dmark junkie :D
Well next weekend I'm going to break (in that I'm sure) 3dmark 2k1 record in 4200/axp category (hope to pass 15k)
The means to do that: my axp 1700+ that oc. to 1980 for benching with 24°C water, but for test I'll connect blocks to direct water suply so ~12°C water and unlimited flow rate goal 2Ghz+, board KX7 voltmoded, and XFX 4200 64mb voltmoded that will hit at least 350/350 with my block. I'll take lots of pics of the experiment .
Here's my current hi score when I had 4200 for few days to took the measures for waterblock, that was with air cooling no voltmod and on my Epox 8kha+, with new detonators I would hit some 1000 more points.
http://service.madonion.com/compare?2k1=4288189

And my 8500 score is still no4 overall, but I now own faster ddr and I pick few more tweaks to improve my memory bandwith, I'm sure I'll improve that score once I get my 8500 back
http://service.madonion.com/compare?2k1=4046368

You have killer o/c on that 1700+!!!
I got my AXP 2000+ last week and I didnt done any serious bench from that because I am waiting GPU block from site wich I send you in my email!! Than I hope to get in top ten!
Now I am stuck with my Leadtek Ti4400 on 305 core, awfull o/c and mem is going to 690! I will make vmod when I get GPU block, I think it will be here in thursday!!
And also here is pic of my current block, this one i got 2 days ago and didnt install it yet and dont know how does it performs:http://v-i-r-u-s.50megs.com/Goran%20blok%201.jpg

http://v-i-r-u-s.50megs.com/Goran%20blok%202.jpg


And I would like to buy some stuff from you!!
What is the best block you have there!?

Welcome to the forum Virusxxx!!!

I have also MJ 1000 in my system, and all I can say is - very good pump!!!

you can also look here

http://forums.procooling.com/vbb/sho...?threadid=4104