Pump
I wonder if there is anyway to make so that for example a Eheim 1048 pump starts and stops with the pc. So I don't have to plug in the pump every time that i'm going to start my computer :)
|
i think u have to splice the wire and connect it to the PSU. something like that. remember seeing a guide at ProCooling about it.
|
|
This is a FAQ.
1 - buy a socket plug and mount it in your case. 2 - wire the socket plug to your PSU socket plug - yes unplug your PSU before... 3 - on this wire, install a 12V relay triggered by the PSU (yellow wires) 4 - install a by-pass switch around the relay so you can turn on the pump 24/24 or for filling the system 5 - do not forget spike protection diodes around the relay. Many schematics and how-to's exist around the web. |
| All times are GMT -5. The time now is 06:53 PM. |
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk... Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...