Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   Watercooling (almost) done. Pics (http://forums.procooling.com/vbb/showthread.php?t=4818)

HMB 11-02-2002 08:34 AM
Watercooling (almost) done. Pics
 
http://pixas.mine.nu/~www/uplfolders...4/CIMG0002.JPG
http://pixas.mine.nu/~www/uplfolders...4/CIMG0003.JPG
http://pixas.mine.nu/~www/uplfolders...4/CIMG0004.JPG
http://pixas.mine.nu/~www/uplfolders...4/CIMG0007.JPG
http://pixas.mine.nu/~www/uplfolders...4/CIMG0008.JPG
Heatercore, homemade shroud :D, innovatek V3 and an eheim 1048. Gonna get something for the front exhaust, cant look all naked like that :cry: On my bed we have some old shit i used before :) The plexiblock is a direct die-block i used before. Didnt work that well, didnt have enough watervelocity.

g.l.amour 11-03-2002 10:48 AM
looks like an effective enough setup. but u got some cleaning up to do to get some ou's and aaa's from this difficult crowd ;-)

HMB 11-03-2002 10:58 AM
Its coming, its coming. Im not done yet :D

gmat 11-03-2002 02:58 PM
Nice work in that tiny Aopen case.
Did U swap original Innovatek fittings with copper elbows ?

HMB 11-03-2002 04:23 PM
Quote:
Originally posted by gmat
Nice work in that tiny Aopen case.
Did U swap original Innovatek fittings with copper elbows ?
Well i replaced innovateks standard fittings with 1/2" brass barbs. Straight ones. Then i put the 90 degree elbows above the barbs.

MadDogMe 11-04-2002 03:19 AM
W0W!, that is a skinny case ain't it?. I would'nt use the 90Deg bends though, I'd use silicone (or Tygon?) for them. then you could have had the pump outlet pointing straight at the rad (no kinks!). good work on keeping the tubing lenght down!, it causes more flow loss than I realised till recently....

HMB 11-04-2002 10:03 AM
Quote:
Originally posted by MadDogMe
W0W!, that is a skinny case ain't it?. I would'nt use the 90Deg bends though, I'd use silicone (or Tygon?) for them. then you could have had the pump outlet pointing straight at the rad (no kinks!). good work on keeping the tubing lenght down!, it causes more flow loss than I realised till recently....
The case is kinda small :mad: Im too poor to buy silicone or tygon tubing :D Nah, (well its kinda true) i dont like silicone tubing. Want the rigid crappy stuff thats cheap and collapses :cry: . Right now i use a 90 degree barb on the pumps exhaust. Thinking about putting the straight barb back and use a 90 degree elbow between the pump and rad....


All times are GMT -5. The time now is 02:39 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...