Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   cooper and aluminium - water and antifreeze (http://forums.procooling.com/vbb/showthread.php?t=5430)

ChronoS 01-08-2003 07:29 PM

cooper and aluminium - water and antifreeze
 
i have an aluminiun heatercore and soon an cooper block, so i have to use water+antifreeze (i dont found water wetter), witch % of antifreeze do i have to use?

thanks

Hixup 01-08-2003 08:25 PM

if i remember correctly if you mix those two metals you in effect create a battery and something goes very bad. Anyone verify this?

bigben2k 01-08-2003 08:42 PM

Verified.

Check out this article.

For the proportion, see this article.

ChronoS 01-08-2003 09:51 PM

but what about the coolance exos?? it mix an aluminium heatercore with a cooper block

Alchemy 01-09-2003 12:44 AM

If you're going to use dissimilar metals, you need to use an additive designed to prevent galvanic corrosion. Most water treatments for cooling systems will have this.

Adding antifreeze to a normal cooling system will only harm performance. It will keep down the algae (most types, anyhow), but there are better ways to do that.

Alchemy

winewood 01-10-2003 03:00 PM

sacrificial metals.
 
I understand that the sacrificial metal is good instead of being a chemist on your liquids and degrading the heat transfer properties of your fluid. If I used zinc or magnesium.. or both. Would this be bad?

Total metals:
Brass (barbs)
anodized aluminium (block)
Copper (radiator tubing or block)
Zinc AND
Magnesium

Does anyone see any benifit to using these 2 sacrificial metals if you can in your system. I am trying to reduce the additives to my water. I just dont want to end up making something thats explosive. :)

bigben2k 01-10-2003 03:22 PM

This chart might help.

You won't find anodized aluminium in there, since it doesn't apply.

Using a sacrificial anode is fine, but I would worry about the residue that it would leave in the coolant. See what Dan at dansdata.com encountered.

Given the above, I thought it might be worth looking into isolating the sacrificial anode in an area of the loop that sees no flow whatsoever, while still maintaining an "electrical" connection to the coolant. Maybe in a branch of a tee, with some kind of lint free filter?

winewood 01-10-2003 04:47 PM

That is the most perfectest :D reply I have every recieved! Thanks!

bigben2k 01-10-2003 05:13 PM

You're most perfectestly welcome! I've never tried it, but it makes sense to me.


All times are GMT -5. The time now is 04:19 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...