YY Cube Case Question.
 

Hello,

I would like to know the exact distance from the top of the power supply to the roof of the case.

Brian W

I have the YY-0221B model. My power supply is 3.4 " tall(its a pc power and cooling silencer 400w atx.) From the top of that, it is 10 " to the top of the case. Hope it helps.

Heheh.

I forgot I even posted that. Oh well, I am working on another project now.

http://forums.procooling.com/vbb/sho...&threadid=5543

Brian W

Question for all YY case owners. If someone would be so kind as to measure the width of the motherboard chamber, I would be ever so thankful. I want to use a YY case for H2O cooling, but I dont know If my 6 inch wide D-Tek heatercore will fit in front where the intake fan is.

BUMP
 

Hello all,

I am revisiting using a cube case for a project. I am asking a big favor.

I want to know the following dimensions:

Inside Heighth of the Right (Drive) chamber : (I know from the above responses that is approx 13.5", but would like another measurement)

Inside heighth of the Left (Mobo) chamber: (I assume same as the drive chamber, but would still like confirmation)

Inside depth of Mobo chamber (from front metal, to rear metal):

Inside depth of Drive chamber (from approx. back of drive, to the rear metal):

Width of Drive chamber:

Width of Mobo chamber:

Thanks,

BrianW

I know someone here has this case, please do me a big favor and grab the tape measure..... Hehehhe

Thanks,

BrianW

I finally remembered to take the measurements: Inside height (drive and mb compartment) 13 3/4", front to back (drive and mb compartment) 15 11/16", depth of the mb compartment 5 3/4" and drive compartment is 7 1/4".

The depth is from the middle divider to the metal side of the door. The door has 1/4" deep folded edges.

Thanks!

BrianW

thx alot dude

this means that your standard hc has no probs being installed in drive compartment, but it will take some hack/slash to install one in the mobo compartment, wonder how kev did it