!!! Waterblock !!!
 

Hi Guys! I am building a waterblock for me, and dont know which and best desing, someone can help me? I exactly wanted to make an equal one to the white to river.

Sorry my English! =)

It sounds like you are talking about http://forums.procooling.com/vbb/sho...8787#post58787 This is a very effective design. I suggest you find out if he is releasing schematics of his block and use them. Why reinvent the wheel if you are just starting?

I'd recomend this one by Morphling1, because it's relatively easy to make.

If you want a challenging design, look at this one.:D

But there is a big diference for the Morphling1 block to the whit river ??? how many ???
With a volcano 6CU+ Mod ( fan more slow and laped ) i put my tbred b 1700+ a 2125Mhz 52full load whit this waterblock the temp is gonna by near 35Full right ??? Here in the brazil is very hot, the temp is near 42 in summer !

If you can afford to import the White water block, all the way from Australia, go for it.

If you want to make your own, you should make a list of the tools that you have, and a list of the tools that you are willing to get.

Make no mistake: this is not something that is actually worth doing, money wise. You should set a limit on how much you are willing to spend.

A very easy one to make is the #Rotor style block, and the performance is actually nice!

As for the temperature in your part of the world, I can't help you there! What I can tell you is that you can expect your CPU to be x degrees above your room air temperature, where x depends on the design.

;)

e ai raptor blz veio, eh nois:D :D :D :evilaugh: :evilaugh:

cole ricc!
eh nois ! braziL rulez a lot !

r4ptor, this is my desing im actually building now.

is quite simple, and cheap. easy to make too.

take a look here

any question, just look for me on icq.

Wich block is beter ???
Morphling1 or -J- ????

I Will do the White River Clone
But i need the Size of it, the holds...
Any one can send me this ????

uP!

im sure morphling's is way better than mine.

mine is more easy to make. you need few tools. no mill or heavy stuff like that.