PC-60 Pics
 

It ain't pretty and it was a drag to build but...

1
2
3
4

Shad

Looks nice ;)


Although you may need to clean up the wires a bit, it looks a little messy eh? :rolleyes:

You can tidy it up some more: try to reduce the tugging on the hoses. Also, your airtrap/tee should be able to catch air, instead of letting it sit in the waterblock (you could try to raise it a bit).

Nice rig!

Nice setup.

I did notice one thing though. On the last pic that you have, I noticed that your +5V line is running below specs. Normal deviations on your +5V and your +12V lines should be 5% (4.75V - 5.25V for +5V). According to your picture, your currently running @ 4.57V. I would definately look into that. IF that reading is correct, you might want to seriously consider getting a new beefier PSU or figuring out why it is soo low.

Just a recommendation from a fellow forum member.

In the plans I'm surprised it runs that low. It's that low when checked with a vom too.

Shad