FS: Fans, Water Chiller & more
 

Model: PD24B2

Comair Rotron Patriot 24V dc. Terminals & ball bearing fans. 235 CFM, 51.2 dBa


Size: 6.75" dia x 2.00" deep (171.5mm x 50.8mm)
Operating Temperature Range: -10°C to +70°C
Storage Temperature Range: -40°C to +85°C
Feathered Edge™ for Lower Noise
Ball Bearings
Weight: 1.84 Lbs. (.84 Kg)


I have 2 of these beasts in excellent working order.

$25 + s/h for both.


Comair Rotron Tarzan:
Tarzan® AC
AC Tubeaxial Fan
FEATURES:
Size: 6.91" x 4.40" deep (176mm x 112mm)
Air Flow: 330 CFM / 65DBA
Voltage: 115 & 230 VAC (50/60 Hz)
Operating Temperature Range: -10°C to +70°C
Storage Temperature Range: -40°C to +85°C
Ball Bearings
Terminal connection
Weight: 5.0 Lbs. (2.27 Kg)

$55



I have parts from a Thermotek T252 Water Chiller I have all but the actual enclosure & the dehumidifier. Both which are not necessary to operate this chiller. It's all working properly but it's been parted out so buyer-beware (some assembly required). I can ship it with everything connected so you know what goes where. It's capable of chilling water to below 5 degrees celsius.

I'm lookin' to get about $150 for it but of course...i'm open to offers etc.

Also have an Iwaki MD-70RLZ 11.4 GPM $175



Thanks for stoppin' by, feel free to ask any questions...if motivated, I could take some pictures.

Oh and I have feedback at heatware & eBay (over 140 positive & no negative...)

shipping and handling to 30066?

$12-14 for USPS Priority.

12v or AC

zThey are 24volt AC

nm sorry

They can be run at 12V. It will keep them nice and quiet ... they like it alot.