Radiators F2 Extreme Dual Fan (Pictures and Data of the two new models pré-finished)
 

Some data and pictures of the pré-finishes new models of radiators F2 Extreme Dual Fan

The tests, data and pictures of the radiator F2 Extreme Four Fan they are here:

http://forums.procooling.com/vbb/sho...&threadid=7335

http://www.watercooler.com.br/fotos/f2/16.jpg


F2 Extreme Dual Fan

Real area of the core 5,5 "x 6,5 "

Some characteristics of the radiator F2 Extreme Dual Fan

That radiator is made with 3 arrays of flat tubes opposed and 12 layers of laminate pure copper for each inch of height,
it has in the total of 48 flat tubes divided and opposed in 3 arrays

It works in an only fluid passage, an entrance of 1\2 " on the left side chamber an exit of 1\2 " on the right side chamber

The entrance has a special chamber with lateral discharge that feeds of fluid in a homogeneous way all the flats tubes
All weld they are them done with 57% of silver and all the connections are re-worked for over diameter and soft angles of entrance and exit

Chambers of pure cooper

Complete shoruds and lateral covers in steel inox polished

http://www.watercooler.com.br/f2/d/1.jpg

http://www.watercooler.com.br/f2/d/2.jpg

http://www.watercooler.com.br/f2/d/3.jpg

http://www.watercooler.com.br/f2/d/4.jpg

http://www.watercooler.com.br/f2/d/5.jpg




F2 Extreme Dual Fan Slim

Real area of the core 5 1\4 "x 5 1\4 "

Some characteristics of the radiator F2 Extreme Dual Fan
That radiator is made with 3 arrays of flat tubes opposed and 12 layers of laminate pure copper for each inch of height,
it has in the total of 40 flat tubes divided and opposed in 3 arrays

It works in an only fluid passage, an entrance of 1\2 " on the left side chamber an exit of 1\2 " on the right side chamber

The entrance has a special chamber with lateral discharge that feeds of fluid in a homogeneous way all the flats tubes
All weld they are them done with 57% of silver and all the connections are re-worked for over diameter and soft angles of entrance and exit

Chambers of pure cooper

Complete shoruds and lateral covers in steel inox polished

http://www.watercooler.com.br/f2/s/s1.jpg

http://www.watercooler.com.br/f2/s/s2.jpg

http://www.watercooler.com.br/f2/s/s3.jpg

http://www.watercooler.com.br/f2/s/s4.jpg

Excuse the pictures they be not good, but my new camera didn't still arrive, those pieces are not still totally ready, it lacks the final finish and last polishing, that it is done after setting up the copper Chambers and conetions

thank you

Looks pretty...

But where do I connect my 2 inch tubing :D

Are you selling these?

Iv´e been following the threads and these just look and seem to perform very well.

Nice work!

2 inch tubing ? bwithout problems, I do of the size that you want, until it can be of 4 " if that you happy : P


It works in an only fluid passage, an entrance of 1\2 " on the left side chamber an exit of 1\2 " on the right side chamber

as i said they are pré-final finish, they are not still mounted, the chambers are underneath of the lateral layer in inox, the connections leave their center

the total dimensions without fans are:

9 x 7 x 4 dual fan

9 x 5,5 x 3 dual fan slim


thank's friends

ops

yes, they work very well and they are the sale, all the 3 models

tks