Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   External Heat exchanger w/ some B@LLS.... (http://forums.procooling.com/vbb/showthread.php?t=7547)

BrianW 08-06-2003 09:48 PM

External Heat exchanger w/ some B@LLS....
 
Here is da linkage:

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2426165222

Looks like a winner.

BrianW

hydrogen18 08-06-2003 11:57 PM

is this designed to warm a cab via hot water?

BrianW 08-06-2003 11:59 PM

It is the same thing you would find behind your firewall in your car, except this is an aftermarket one, that you can put anywhere. It works exactly the same way your heater in your car works. Hot water from your engine cooling system runs through the heater core, and the blower blows air over the warmed heater core, giving you warm air.

BrianW

winewood 08-07-2003 01:45 AM

It seems to wide to fit in my case.. otherwise.. wow

Pakir 08-07-2003 02:15 AM

Geez, thats one sweet piece =)
That would be just perfect for lazy me...

MadDogMe 08-07-2003 04:18 AM

24V would run nice and quiet at 12V as well. Can you get +17V out of a PC PSU by using the -5V as an earth maybe?...

winewood 08-07-2003 04:43 AM

Afraid the meanwell psu 24v would be perfect.. I had like 14 of them.. too bad I sold them all. :|

CoolROD 08-07-2003 11:12 AM

That ebay find reminds me of a possible great source for blowers / radiators. A lot of fork lifts, lift trucks, etc. have cab heaters similar to what you linked to. Most are 12V and appropriately sized and packaged for "Common" w/c systems. Might be worth a try. There are many fork lift salvage places / repair shops / junk yards! :D

cpufan 08-09-2003 05:53 PM

I bought it:D

BrianW 08-09-2003 06:10 PM

Cool, I am glad someone did. No matter what it will cool like a mutha....

BrianW

SexyMF 08-09-2003 11:13 PM

Quote:

24V would run nice and quiet at 12V as well. Can you get +17V out of a PC PSU by using the -5V as an earth maybe?...
This is no advisable since you can only draw aroud 1.5W via the -5V rail.

airspirit 08-10-2003 12:46 PM

This would be great for a far external cooler, like outside or in another room. All you would need internal is your pump and block, then run your two tubes "snake wound" with protective tape out to the cooler's location. That's something I wouldn't mind having on my porch in order to have a silent PC ... then fan noise be damned!


All times are GMT -5. The time now is 02:31 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...