My Main Rig
 

Ok I thought id post some pictures and discribe what im currently using.

start off with a teaser pic :D
http://www.empty.eclipse.co.uk/Stuff...Comp%20018.jpg

Now i'll tell you whats in it
System
Abit-NF7_S v2.0
512mb PC2100 Crucial [purchased some PC4000 OCZ Dual Channel gold to replace]
1700XP Palomeno @ 1650 [purchased an XP2500 barton to replace]
120GB IBM
GF2 PCI [my current card is being RMAd]

heres a few inside shots
http://www.empty.eclipse.co.uk/Stuff...Comp%20014.jpg
http://www.empty.eclipse.co.uk/Stuff...Comp%20016.jpg
heres a shot of my HDD cooler
http://www.empty.eclipse.co.uk/Stuff...Comp%20010.jpg
and a top shot of it
http://www.empty.eclipse.co.uk/Stuff...Comp%20009.jpg
The cooling is as follows:
Danger den Maze 3 [1week odd till i get the cascade SS]
Danger Den Z-chip NB
Danger Den Maze 4 GPU [black]
Evolution 1 HDD cooler
Tank-o-matic Res
Eheim 1250pump
With a Bix Gold and Papste Aluminum 120mm fan on a rheo

Case mods carried out so far
-Custom logo has been CNCed into the front plexi of the case.
-The Chassy has been painted with a finger print retardent Silver paint.
-The otusides have been painted witha blue and silver paint
-Near grills removed and replased with custom logo fan grills.
-Made a rehostat for the 120mm fan ont he rad goes from 12-5volts
-Custom 2x20 LCD made and fastened into top bay
-Reservior fitted to top of case
-PSU modified with silent fans and wires braided and removed white AT lead
There is more to be done to the case but have no piccies at the mo

Will update with some full sized pictures of hte case with its skin on :D think thats everything

comments welcome


Thanks

Re: My Main Rig
 

Can you tell me more about the Papste Aluminum 120mm fan
I was looking at this fan myself.
Aluminum 120mm Fan
Air Flow 80 CFM
Fan Speed 2000 RPM
Noise Level 29 db

It would be very quite at 7volts.
How does it compare to the Pabst fan you have?

Re: My Main Rig
 

It'll be a bit longer than that - more like 3-4 weeks still before you'd have it in your hads. Got the silver just yesterday. Still gotta get them machined (dropped it off this morning), then finished, then packaged and sent.

damn :( i was hoping a week :'( arh well, could work in my favour then. hmmmmmmm


anyhooo will have some updated images of my rig, what you think so far

damn :( i was hoping a week :'( arh well, could work in my favour then. hmmmmmmm


anyhooo will have some updated images of my rig, what you think so far

Looks good...
I think you should try tying up some of your cables..
it would look neater.
other then that it los sweet.

can you tell me a litle bit more about the Papste Aluminum 120mm fan
specs?

according to the label it ses

Papst (r)
TYP 4182NGX
its an alumin fram with plastic fins, think there some weird materal quite strong dont break when finger is acerdently inserted they just cut to bone :( lol

more specs as on label
12v DC
290mA
3.5W
(7-15v DC)

hope that helps off to find some proper specs now

Found It :D


Size Type Voltage CFM Part#
119MMx38MM SLEEVE 7-15VDC 94 4182NGX


found it HERE

Hows that

hey nice rig M_D_K I like it:drool: