Pro/Forums - same design,different result?

Pro/Forums (http://forums.procooling.com/vbb/index.php)

- Water Block Design / Construction (http://forums.procooling.com/vbb/forumdisplay.php?f=37)

- - same design,different result? (http://forums.procooling.com/vbb/showthread.php?t=8049)

same design,different result?

murks 3 vs this one: wath's the reason?
http://www.bernd-haller.de/murks%20vor%20polieren_5.jpg

Re: same design,different result?

Quote:

Originally posted by watercoolerking
murks 3 vs this one: wath's the reason?
http://www.bernd-haller.de/murks%20vor%20polieren_5.jpg

Well, while I can't tell you why this block appearantly got beat by the "Murks3 rev1.1", I'll provide a link to the "orignal" discussion in a german forum:
http://www.kaltmacher.de/viewtopic/t-23050.html

Of course, you'll also find some more pics there aswell. ;)

The test results of WCP can be seen here:
http://www.watercoolplanet.de/index.php?open=4&show=2

His homepage with additional pictures:
http://www.bernd-haller.de/selbstbau_wasserkuehler.htm

Actually, this block only shares some similarities with the "Murks3". It's a different design - this block has 36 jets/cups vs. the "unknown number" of the Murks3 REV1.1 (couldn't find this info anywhere) and the Murks3 with 25 jets/cups.

Regards,

dot

is the number of jets cost so much differents?

Its not only the number of jets. The number, baseplate thickness, jet ID, ID, Jet length, hole depth, hole adjustment, the hole/jet ratio and a lot of other facts affect the performance.
The Murks 3 is and the cooler above are quite close by the way (0.60°K difference).