My first WC set up pictures
 

this is so far what i have been doing for the last 2 month, hopefully i be able to finish this project in the next 2 weeks.

http://home.comcast.net/~ily_seun/DSCI0011.JPG


http://home.comcast.net/~ily_seun/DSCI0016.JPG


http://home.comcast.net/~ily_seun/DSCI0017.JPG

Why did you fill it without a waterblock on it? Otherwise, looks good to me.

Hey - What pump is that? :confused:

How much doesthat flow meter kill your flow rates?

I have the water blocks, they will go on sometime next week. the pump i am using is the CM30P7-1.

Actualy i dont even worry about flow rate with the flow switch i have, there is almost no rectriction there, and what you dont see is that i actually have 4 rads and a weird home made set up fill and bleed system that i came up with. the flow is so high i end up ordering a second reservor (is suking the air from my aqua-comp reservor on the top off my comp back to the system).


By the way Kudos to Abit motherboards, this rig actually shutt down in 1 sec when no fan signal is detected.



Here is the link from where i got the pump:
http://store.hamiltonmarine.com/browse.cfm/4,6387.html

Looks nice, what parts are ya using (block, rad, etc.)?

$165 for a pump? Sweet christ!!! What kinda waterblock you using?

Here is a complete list of the parts i am using:

Magnetic Driven Centrifugal Circulation Pump, CM10P7-1
The Aquatube header tank
4 Black Ice Micro Radiators
Angel Eye Tech Bay-Res Reservoir
MAZE 4 cpu block
Danger Den Z-Chip Block (Intel 865/875)
Omega FPR121 flow switch