My Current Position
 

I'm about to make the plunge into water cooling and wanna share what I got so far :). Thermochill HE120.3 radiator is mounted to the top of my case with 3 Enermax 120mm fans on top of it rated at 65cfm. I have a bay res that just takes up one drive space (I know how to fill it up when i get everything set up, but i have no idea of how to drain the system or even if i'm ever suppose to drain it :shrug: ) DangerDen RBX with Socket Hold Down Block. I'm waiting to see how good dangerdens new 12V pump is suppose to be before i buy a pump. From reading on here, I figure i will want the MCP600. Anyways, thats where i'm currently at. Any advice, or links to helpful articles would be appreciated, thanks guys :)

Impressive performance for a pump of its size, matching even larger pumps. Problem will be its noise, with a whine that is reminiscent of the ~4000RPM 60mm CPU heatsink fans of old (note - I don't mean the 7200RPM screaming 60mm Delta's of Thermalright SK6 infamy), but it's something that you will noticably hear outside of a typical closed metal case.

If low-noise is a concern, then the MCP600 would be a better choice. If you're a water-cooler who runs his multiple 80+CFM 12cm radiator fans at 12V, then you're not likely to be bothered by the D4's noise.