Pro/Forums - 8950 and a 7237 for sale

I am going to get a Lian Li so i wont need this anymore

I have a modded Enlight 8950 Server Case
http://enlightcorp.com/server_cases/8950_server.shtml

I dont use the wheels cause 1 is broken

has 2 blowholes on top ( push up against most full size drives so i
dont put anything there. but a Live drive would fit perfect) 2 slots
for fans on the back and 3 holes on the side with a window.

It will come with no Powersupply since that is my enermax for my new
system.

I will leave all fans except for the top 2 (and still may leave those
just not sure yet

the Powersupply slot is tricky but a Enlight PS will fit no problem ,
but the enermax i had to flip the rear panel and also not screw it in
all the way.

pictures

pic of side case. the small piece cut off in the corner was made for a
LCD serial port http://www.angelfire.com/or/KCDMS/images/8950_001.gif

top view http://www.angelfire.com/or/KCDMS/images/8950_002.gif

looking up to top http://www.angelfire.com/or/KCDMS/images/8950_003.gif

I also have a 7237 that i cut to allow 2 80mm fans on the back (have
yet to see if it works) that i will include for 30 bucks if interested
if you get the 8950 and I will include a 250w PS

back side of case where holes are http://www.angelfire.com/or/KCDMS/im...nlight_001.gif

in the upper left corner you can see the metal is partially bent http://www.angelfire.com/or/KCDMS/im...nlight_002.gif

nother of the back side http://www.angelfire.com/or/KCDMS/im...nlight_003.gif

last one from the back http://www.angelfire.com/or/KCDMS/im...nlight_004.gif

110.00 for both cases if you pick them up

the 8950 has a total of 5 extra fans in it and 5 fan guards while the
7237 does not have any fans

8950 retails for 150.00 without PS

let me know