Lytron small rad
 

Bought this from Hapless back in Jan (seems much longer ago). Was gonna do a seperate loop for vid cooling but haven't got around to it. It's made for 3/8" ID tubing, also the multi passes are gonna be somewhat restrictive. Even with those two negatives, these are suposed to be very good performing radiators. It's built very well and the pics don't do it justice.
http://members.sigecom.net/unloaded/Lytron1.jpg

The top has mounting holes for 120mm fan. I don't have a fan handy so block is for scale.
http://members.sigecom.net/unloaded/Lytron4.jpg

Bottom bracket is for mounting to a case or maybe possibly a shroud. The shiny hole looks like a rivot was ground off.
http://members.sigecom.net/unloaded/Lytron5.jpg

The NamePlate:
http://members.sigecom.net/unloaded/Lytron2.jpg

Spec/Drawing in PDF.

I hate to part with this, but I hate more to see it just gather dust. I know somebody can put it to good use. I'll take $40 shipped (in US) for it.

Refs:
heatware=unloaded ebay=unl0aded
Email:
<<--mynick @sigecom.net

Email would be better than PM's.

peace.
unloaded