Pro/Forums

Pro/Forums (http://forums.procooling.com/vbb/index.php)
-   General Liquid/Water Cooling Discussion (http://forums.procooling.com/vbb/forumdisplay.php?f=9)
-   -   C-systems, what happened? (http://forums.procooling.com/vbb/showthread.php?t=9918)

psychofunk 07-01-2004 08:40 PM
C-systems, what happened?
 
This pumps made a big splash and now the early morning glow has worn off. What has happened? Has anyone gotten one yet? What is the real deal? My stupid danner is making funny noise and if this is the second leak I am threw with them. I really wanna try out a pair of these c-systems pumps? So again any info? :shrug:

psychofunk 07-02-2004 12:26 AM
Okay so I saw what was said in the 12v pump thread but that is not first hand experience (well it is but it is a site I know nothing about). And I also read about the two leaks in the c-systems thread. Anyone else got any experience or is there another thread that I missed that has some input on the c-systems pumps?

SlaterSpeed 07-02-2004 03:19 PM
I belive they are listed at D-Tek. Not sure if they have become avalible yet tho.

psychofunk 07-02-2004 03:24 PM
but no first hand experiences???

thebigNil 07-02-2004 03:39 PM
I pre-ordered one from D-Tek. They are saying that they will be shipping in a couple days, once they get their shippment. I'll post my thoughs on it once I get mine. I only have the danner to compair to and no test equipment. but it'll be 1'st hand info anyway.

JFettig 07-03-2004 08:39 AM
I too have one comming, If I remember to, Ill post my opinions.


Jon

mikehotel 07-03-2004 10:00 AM
http://forums.procooling.com/vbb/showthread.php?t=9900

See my thread, I have one.

coolroyboy2 07-03-2004 08:10 PM
I have a csp750 and I like it, its tiny , easy to mount, quiet. I'm running a chevette HC with 2 80mm panaflos, a Maze 4 CPU WB. Even with room temps as high as 80F the cpu has not reached over 42C. I will be adding a second pump and Maze 4 GPU and chipset WB as soon as D-tek sends it.

JoeKamel 07-03-2004 09:06 PM
Quote:
Originally Posted by coolroyboy2
I have a csp750 and I like it, its tiny , easy to mount, quiet. I'm running a chevette HC with 2 80mm panaflos, a Maze 4 CPU WB. Even with room temps as high as 80F the cpu has not reached over 42C. I will be adding a second pump and Maze 4 GPU and chipset WB as soon as D-tek sends it.
Just out of curiosity, what CPU is that on? I'm looking at WCing my Palomino 2100 and I don't want to mod the case too much so a 120mm rad is out of the question, but I can go with a 2x80.
Also, just wondering, what model number is the HC and what are its dimensions?

coolroyboy2 07-03-2004 10:17 PM
AMD barton 2500@2300 11.5x200 1.7 volts. Autozone PN# 399069. The HC is aprox 6x6x2 inches. A120mm fan will fit on it but the one I bought had to be RMA for a rattle so I switched to the 2 80mm on a lucite shroud I made.

JoeKamel 07-04-2004 12:46 AM
Quote:
Originally Posted by coolroyboy2
AMD barton 2500@2300 11.5x200 1.7 volts. Autozone PN# 399069. The HC is aprox 6x6x2 inches. A120mm fan will fit on it but the one I bought had to be RMA for a rattle so I switched to the 2 80mm on a lucite shroud I made.
Ahhh shite.. Looking for something smaller than 6x6... really looking for like a 6x3 if there are any out there. I need to spend some time looking, haven't had it of late though.

greenman100 07-06-2004 05:10 PM
Quote:
Originally Posted by JoeKamel
Ahhh shite.. Looking for something smaller than 6x6... really looking for like a 6x3 if there are any out there. I need to spend some time looking, haven't had it of late though.
ford econoline + dremel + soldering is the best you'll do.

psychofunk 07-06-2004 06:31 PM
Just an FYI, I got word from Dtek today that the pumps that they are getting from Csystems are in fact the Type III anodizing. Just in case you wanted to know!!

saperboy 07-08-2004 09:35 PM
go head down to DTEK's site... just now they have put up the pictures for the black version with white etched DTEK logo. Looks nice.

JFettig 07-12-2004 06:24 PM
I got mine today, its really tiny! 2x2x1.9375"

What I dont like about it is the threads for the barbs, only plastic barbs work without wrecking stuff. Im making a new housing.


Jon


All times are GMT -5. The time now is 02:21 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...