Pro/Forums - View Single Post - Got a cascade yesterday... what pump and what about future upgradeability with A64?

Cathar · 01-29-2004, 06:03 AM

a) MCP600 will be a good choice of pump. The pump heat of the Eheim 1260 will likely overwhelm any benefit you would see due to the increased flow rates. Stick with the MCP600

b) The MCP600 has an attractive PQ (flow vs pressure) curve that makes it well suited for multiple block setups. The 120.3 will outperform (given the same fan type) almost any other radiator on the market.

c) Yes, there are A64 plate/kits already available for the Cascade.

01-29-2004, 06:03 AM	#2
Cathar Thermophile Join Date: Sep 2002 Location: Melbourne, Australia Posts: 2,538	a) MCP600 will be a good choice of pump. The pump heat of the Eheim 1260 will likely overwhelm any benefit you would see due to the increased flow rates. Stick with the MCP600 b) The MCP600 has an attractive PQ (flow vs pressure) curve that makes it well suited for multiple block setups. The 120.3 will outperform (given the same fan type) almost any other radiator on the market. c) Yes, there are A64 plate/kits already available for the Cascade.