Pro/Forums - View Single Post - Watercooled Antec Truecontrol, voltage on the blocks.

petter · 02-04-2004, 08:40 AM

#8 > I reused the ones from the original heatsinks.
http://www.nskjaer.dk/antec/cwdata/antec37.html

When I measure the volts between the 2 waterblocks, it depends on the setting of my multimeter. If I measure with the setting at max 200V dc, the volts is 67V, when max is 20V, the volts is 6.7V.
It is very strange I think.
I think I will take it apart later and recheck all connections, but at first I will try and connect the 2 points where the original heatsink was attached.

02-04-2004, 08:40 AM	#9
petter Cooling Neophyte Join Date: Aug 2002 Location: Denmark Posts: 16	#8 > I reused the ones from the original heatsinks. http://www.nskjaer.dk/antec/cwdata/antec37.html When I measure the volts between the 2 waterblocks, it depends on the setting of my multimeter. If I measure with the setting at max 200V dc, the volts is 67V, when max is 20V, the volts is 6.7V. It is very strange I think. I think I will take it apart later and recheck all connections, but at first I will try and connect the 2 points where the original heatsink was attached.