Quote:
|
Originally Posted by Arcturius
Could you back that up, please? The only hard data I was able to find showed the BIM2 keeping water temp (1L total volume) at 6C above an ambient of ~23.4C, with a 100W heatload.
The BIX managed 5.4C above an ambient of ~22.2C.
My German is weak, and machine translators aren't much different, but the testing methods @ watercoolplanet.de seem to be reasonably competent.
BIM2 xls
Rad performance list
Testbench description |
that's the testbed for the blocks.... the rad tests (from the data) seem to have taken about 35mins - which seems awfully short - need to see the details...
the makers themselves claim 662.91W for the BIM2 - and that's at 40C above ambient!... thats a c/w of over 0.06...
http://www.hwlabs.com/products/blackicemicro2.htm
BIM claims 275W - a c/w of over 0.145
http://www.hwlabs.com/products/blackicemicro.htm