Pro/Forums - View Single Post

killernoodle · 02-09-2004, 03:15 PM

EDIT: HOLY CRAP!!! I thought my camera was in 640x480.... Grrrr. I'll chage the pics later. For now, you will have to deal with it. 56kers better click off this page now

This stuff is a bit soft, but I managed to get the design working.

Time for some updates:

Worked on the NB block today and managed to finish it up completely.
[IMGhttp://www.killernoodle.com/main/images/reviews/Waterblocks/NB1.JPG[/IMG]

And I started the GPU block today, milling/filing out the edge so it can still use the shim.

I managed to make a mess out of it, the screw that stops the drill press from going down farther (the stop I think) got loose and I gradually started milling deeper and deeper. I managed to catch it before I went through the copper, so it is okay. Lesson learned: dont try to mill stuff with a drill press unless it is plastic

02-09-2004, 03:15 PM	#36
killernoodle Thermophile Join Date: Sep 2002 Location: Charlotte, NC Posts: 1,014	EDIT: HOLY CRAP!!! I thought my camera was in 640x480.... Grrrr. I'll chage the pics later. For now, you will have to deal with it. 56kers better click off this page now This stuff is a bit soft, but I managed to get the design working. Time for some updates: Worked on the NB block today and managed to finish it up completely. [IMGhttp://www.killernoodle.com/main/images/reviews/Waterblocks/NB1.JPG[/IMG] And I started the GPU block today, milling/filing out the edge so it can still use the shim. I managed to make a mess out of it, the screw that stops the drill press from going down farther (the stop I think) got loose and I gradually started milling deeper and deeper. I managed to catch it before I went through the copper, so it is okay. Lesson learned: dont try to mill stuff with a drill press unless it is plastic __________________ I have a nice computer. Last edited by killernoodle; 02-09-2004 at 03:35 PM.