Pro/Forums - View Single Post - How do i jumper the psu to run w/o being plugged in the mobo?

j3rkoff · 02-10-2004, 10:55 AM

I got a new psu, and was gonna use my enermax w/ 33A on the 12v to power the tec. If anyone knows an article to something like this, let me know.

Also, I was planning on the vcore around 2.1 or so (amd barton) with a high fsb, and the keeping temps up, and it's only going to be on for a day or so until i get the neoprene, so is neoprene immediately necessary? Or can I get by on conformal coating and dielectric compund. Thanks.

02-10-2004, 10:55 AM	#1
j3rkoff Cooling Neophyte Join Date: Aug 2003 Location: AZ Posts: 50	How do i jumper the psu to run w/o being plugged in the mobo? I got a new psu, and was gonna use my enermax w/ 33A on the 12v to power the tec. If anyone knows an article to something like this, let me know. Also, I was planning on the vcore around 2.1 or so (amd barton) with a high fsb, and the keeping temps up, and it's only going to be on for a day or so until i get the neoprene, so is neoprene immediately necessary? Or can I get by on conformal coating and dielectric compund. Thanks. __________________ Currently using one large rad, two gallons of coolant, and two 13.5 inch fans to cool my car's engine.