[tuxp3]

alright i have this Pentium 4 that i am desperately trying to get working.. still waiting for a part and with my boredom i have done this with a small IC heatsink i found in a linksys router that was trashed...
so i get my hack saw out and go at it with no real purpose...
and heres what i got with a quick sanding/lapping (cant see it)
PIC 1
fits nice doesnt it?
this is the underside of the P4 (socket 423)
PIC 2
-----------------
thats all well and good but what about things on the mother board....
far away.... Pic 3
Close-up Pic4
Blue boxes are 1/8" red are 1/16" or so and the ziff socket is about 3/16" tall. also a bunch of small transistors and stuff.
SORRY about Blur pics the digicam i have is very cheap
-----------------------------------------
Ideas on how to make the small heat sink fit?
the CPU in the ziff socket is about 1/16" higher then normal, so it cant work.

Now, what effect will this have on my Cpu's temp!? tests to come in a few days

Thanks, Tux