Pro/Forums - View Single Post

htkm1 · 02-15-2004, 02:37 AM

Currently I am running a WB, NB Blocks and a Gpu pelt(80W) with a Thermochill 120.3. I am thinking of getting a WB pelt 226W (Swiftech). Also I will be changing the Gpu pelt to a 172W. Both will be powered(12v) by an Antec 480W PSU. I have another 480W PSU supplying the Rig. the ambient Temp is 26~30C. I stay near the Equator.
It will be running on a loop WB(pelt)>>NB>>Gpu(pelt)>>Rese>>Pump>>RAD.
So my question is;
1. Is it advisable to get 2 x 120mm RADs and // them. One each going to WB and Gpu with NB on either one?
2. With the above loop, how much will the Gpu pelt performance be effected?
Any advice/comments welcome.

02-15-2004, 02:37 AM	#1
htkm1 Cooling Neophyte Join Date: Sep 2003 Location: SG Posts: 8	WB and Gpu pelt with one RAD Currently I am running a WB, NB Blocks and a Gpu pelt(80W) with a Thermochill 120.3. I am thinking of getting a WB pelt 226W (Swiftech). Also I will be changing the Gpu pelt to a 172W. Both will be powered(12v) by an Antec 480W PSU. I have another 480W PSU supplying the Rig. the ambient Temp is 26~30C. I stay near the Equator. It will be running on a loop WB(pelt)>>NB>>Gpu(pelt)>>Rese>>Pump>>RAD. So my question is; 1. Is it advisable to get 2 x 120mm RADs and // them. One each going to WB and Gpu with NB on either one? 2. With the above loop, how much will the Gpu pelt performance be effected? Any advice/comments welcome.