Quote:
|
Originally Posted by Wildfrogman
Very interesting cfd results, with that software you could change around the jets depth in the cups. Or you could just by some trial and error adjust the depth of the cups and see the results quickly. As seeing the results of a shallower cup depth around the edges and how the heat acts when you change around things on the block.
|
yeah....
have tried a whole lot of variables.........
at the moment ....
the best size and depth for the baseplate dimples is 4 mm depth and 3 mm diameter for 1mm jet holes with 2 mm height...
the analysis is still in progress.....
will post when i get the optimum jet size and height