Hi,
I don't think the iwakis will be pushing more than 7 l/m through my system.
The setup will be
2 external boxes under my desk.The boces will be on top of each other.
will be using a cascade wb
each external box will contain:
-iwaki md15-R (mind you, on 50 Hz, so a lot less powerfull, about 2,4 m head and 960 l/h
-2x xlr120 jpiperformance rads running in series
the computer case itself will be about 70 cm above the lowest box and about 35 cm above the upper box
the setup will be in this order
lowest box-higher box-computer case(cascade)-lower box, etc.
all will be done with 1/2 inch ID tygon tubing.
Just couldn't resist to buy the two iwakis for 70 euro's(for both of them!)! If i buy them new in the Netherland, i would have to pay 210 euros EACH!
My watercooling sytems seems to be little bit over the top, and it is.Will be using 1 external box per system in the future, just waiting for the new system to arrive and i wanted to try this until the second system comes in.
My external boxes look like this:
