Pro/Forums - View Single Post

RedLightRunner · 03-06-2004, 12:56 AM

Which cooling system would be best for me: Water with pelts or Prommie Mach I?
Here is my setup:
Intel P4 2.8 800 clocked to 3.01
Abit IS7 mobo
PC2700 overclocked
ATI Radeon 9800pro 128
What I want to do is increase my overclocking capabilities and cool my cpu to about zero or just below. BUT I want to cool/freeze my gpu as well. I configured a setup with water and the prommie and they both come out equally im price.
Mach I – 496
Water with pelts – 550 roughly cpu and gpu pelts
Space is no issue or moblility, I would like to go to a few lan parties but not sure where they are in my area. So portability is not a huge concern. Swiftech is the company that I was going to build the water system from and I know that the pelts put out A Lot of heat. I thought about chilled water but I might as well just go with the prommie then. And the prommie only does the cpu. Is there a kit to make the prommie cool the gpu as well? Not too experienced with vapor cooling so which kit would I get the most out of what Im looking for? I would like to overclock and run at load and not go higher than 25*c cpu. Is there additives that would make the water in the water setup cool the pelts more efficiently. I know that the more heat that you dissipate from the pelt the colder it gets. Any help thanks.
Im gonna change the mem also to 3200 with this mod.

03-06-2004, 12:56 AM	#1
RedLightRunner Cooling Neophyte Join Date: Mar 2004 Location: california Posts: 1	prommie or xtreme water setup? Which cooling system would be best for me: Water with pelts or Prommie Mach I? Here is my setup: Intel P4 2.8 800 clocked to 3.01 Abit IS7 mobo PC2700 overclocked ATI Radeon 9800pro 128 What I want to do is increase my overclocking capabilities and cool my cpu to about zero or just below. BUT I want to cool/freeze my gpu as well. I configured a setup with water and the prommie and they both come out equally im price. Mach I – 496 Water with pelts – 550 roughly cpu and gpu pelts Space is no issue or moblility, I would like to go to a few lan parties but not sure where they are in my area. So portability is not a huge concern. Swiftech is the company that I was going to build the water system from and I know that the pelts put out A Lot of heat. I thought about chilled water but I might as well just go with the prommie then. And the prommie only does the cpu. Is there a kit to make the prommie cool the gpu as well? Not too experienced with vapor cooling so which kit would I get the most out of what Im looking for? I would like to overclock and run at load and not go higher than 25*c cpu. Is there additives that would make the water in the water setup cool the pelts more efficiently. I know that the more heat that you dissipate from the pelt the colder it gets. Any help thanks. Im gonna change the mem also to 3200 with this mod.