Pro/Forums - View Single Post

Hikari · 03-07-2004, 02:26 PM

Hello everyone! It is nice to write the first topic on this Forum which would describe my new...

Finally after 10 months of hard work, thousands of mods, changes, repairs I can say that it is finished!

The essential priority was maximum efficiency provided that all elements are inside the case. The rest is also very important to me: thanks to rheobus I have control over all fans (efficiency or silence in night); the hole system must be of highest quality and it should look at least good.

In case of increasing the efficiency I have no idea what to improve. I paid great attention to all details:
- I used all available space in my case (no place left for next radiator

)
- I installed 2 radiators in optimal spots
- Shroud is a standard; all fans which blows into the case have filters
- I use only PAPST fans (two exceptions - one original Chieftec in side panel and one TT on Memory Cooling Kit)
- Pump of nominal value reaching 6m3/h
- The shortest lenght of hoses
- Good air circulation
- High quality and efficiency waterblocks. All of them are sanded and the surface, which do not has a contact with water or the elements cooled is covered with transparent varnish
- The system is definitely more effective and more silent than AC

So let's go! Enjoy

Some pictures of my case with WC inside.

Without side panel you can observe the labyrinth of hoses

It required a lot of work but It was the only way to cool everything the best way.

On the left HALM - the heart of my system. Head of 8m and 6000 l/h is what I wanted to achieve. On the right Chevette radiator with shroud + PAPST 172mm (12V).

Front - you can see the dust on the filters after 3 weeks!

Now something which looks good. The opened case with illumination. I prefer LED's to cathodes (although I have 2x 10cm UV) because using them you can have better efects - one cathode and all is blue :/

My waterblock's top with 3 LED's and engraved text "WC eXtreme 3.0" + my name. Thank to Cris and Popixs for perfect job!

Thanks to LED's and UV Dye-Lite the effect is brilliant.

Mosfet waterblock.

Weland - my NB cooler.

Rheobus + thermometer. Reservoir is from DangerDen (4 LED illumination), but it is not proper for this system :/

I painted tanks of radiator silver. 2 white LEDs illuminate the shroud.

The case with illumination and side window (real glass!). Thank to CNC water cutting its shape is PERFECT. Great job (thanks to Hub and Krzysiek).

My headquaters

One picture of window - I like it very much!

And in the end pictures of my waterblocks.

Thanks to:
CopperField - great waterblocks; Mate, Discotech; Popixs i Witch; Michal Z; Hubert and Krzysiek - water cutting; D&M&G&B - digital camera; and many other people.

Any comments or suggestions?

03-07-2004, 02:26 PM	#1
Hikari Cooling Neophyte Join Date: Nov 2003 Location: Warsaw, POLAND Posts: 12	WC eXtreme 3.0 Made in Poland Hello everyone! It is nice to write the first topic on this Forum which would describe my new... Finally after 10 months of hard work, thousands of mods, changes, repairs I can say that it is finished! The essential priority was maximum efficiency provided that all elements are inside the case. The rest is also very important to me: thanks to rheobus I have control over all fans (efficiency or silence in night); the hole system must be of highest quality and it should look at least good. In case of increasing the efficiency I have no idea what to improve. I paid great attention to all details: - I used all available space in my case (no place left for next radiator ) - I installed 2 radiators in optimal spots - Shroud is a standard; all fans which blows into the case have filters - I use only PAPST fans (two exceptions - one original Chieftec in side panel and one TT on Memory Cooling Kit) - Pump of nominal value reaching 6m3/h - The shortest lenght of hoses - Good air circulation - High quality and efficiency waterblocks. All of them are sanded and the surface, which do not has a contact with water or the elements cooled is covered with transparent varnish - The system is definitely more effective and more silent than AC So let's go! Enjoy Some pictures of my case with WC inside. Without side panel you can observe the labyrinth of hoses It required a lot of work but It was the only way to cool everything the best way. On the left HALM - the heart of my system. Head of 8m and 6000 l/h is what I wanted to achieve. On the right Chevette radiator with shroud + PAPST 172mm (12V). Front - you can see the dust on the filters after 3 weeks! Now something which looks good. The opened case with illumination. I prefer LED's to cathodes (although I have 2x 10cm UV) because using them you can have better efects - one cathode and all is blue :/ My waterblock's top with 3 LED's and engraved text "WC eXtreme 3.0" + my name. Thank to Cris and Popixs for perfect job! Thanks to LED's and UV Dye-Lite the effect is brilliant. Mosfet waterblock. Weland - my NB cooler. Rheobus + thermometer. Reservoir is from DangerDen (4 LED illumination), but it is not proper for this system :/ I painted tanks of radiator silver. 2 white LEDs illuminate the shroud. The case with illumination and side window (real glass!). Thank to CNC water cutting its shape is PERFECT. Great job (thanks to Hub and Krzysiek). My headquaters One picture of window - I like it very much! And in the end pictures of my waterblocks. Thanks to: CopperField - great waterblocks; Mate, Discotech; Popixs i Witch; Michal Z; Hubert and Krzysiek - water cutting; D&M&G&B - digital camera; and many other people. Any comments or suggestions? __________________ ...::: Performance Cooled By H20 :::... WC eXtreme 3.0 FINISHED!!! Last edited by Hikari; 03-07-2004 at 02:42 PM.