2 things:
Quote:
|
Originally Posted by Hikari
Please notice that my pump has a head of 8m and max. water flow amounting to 6,000 l/h so don't have to worry about the flow.
|
No.
Its because of the pump that you will get higher flows, and at higher flows, that kind of problems on restrictive tubes/elbows become of higher and higher importance.
That way you will crush your pump to extreme situations, causing her to overheat, overheat the water and diminish the resulting eficiency (with you are looking for).
Not to mention the higher probability of a pump failure.
With a small enouf pump, with 1/2" tubing you could probably dismiss the elbows, since at the low flow the water is pumped, the restriction would be so small that it would be ignorable.
But not with big pumps.
Quote:
|
Originally Posted by Hikari
Now tell me is it a reap or development?
|
Do as you wish. Say what you want.
But admit it is a clone.
The first versions were 9 fins. Your new one is 7.
"Designed by your team?" C'mon.
Admit it.
But this is the last post on the subject. The most direct looser is Dtek.
Let them do anything if they wish.
Peace out.