Pro/Forums - View Single Post

AntiBling · 03-14-2004, 01:20 PM

My system is pretty close to yours configuration wise. Those temps are not really that bad. Mine are lower, but just by a few degrees. If you are using the MB sensors, who really knows what the temp is anyway? You're in the ballpark, thats the best accuracy you could expect.

Have you tried reseating the block? A shim really helps with the RBX on an XP, I tried it both ways and it made a big difference. You can play with the different nozzles... I didnt buy them, the default one was good enough.

I have
Danner Mag3
RBX nozzle 1
Maze4 GPU
89 Camaro core with 2 172mm Papst fans push/pull
XP2400 stock speed
Radeon 9700pro 351/351

There are so many variables its tough to say without actually seeing your system how it could be improved, if at all.

03-14-2004, 01:20 PM	#8
AntiBling Cooling Savant Join Date: Jan 2004 Location: orlando FL Posts: 147	My system is pretty close to yours configuration wise. Those temps are not really that bad. Mine are lower, but just by a few degrees. If you are using the MB sensors, who really knows what the temp is anyway? You're in the ballpark, thats the best accuracy you could expect. Have you tried reseating the block? A shim really helps with the RBX on an XP, I tried it both ways and it made a big difference. You can play with the different nozzles... I didnt buy them, the default one was good enough. I have Danner Mag3 RBX nozzle 1 Maze4 GPU 89 Camaro core with 2 172mm Papst fans push/pull XP2400 stock speed Radeon 9700pro 351/351 There are so many variables its tough to say without actually seeing your system how it could be improved, if at all.