Pro/Forums - View Single Post

lolito_fr · 03-16-2004, 12:06 PM

Thanks

Something I forgot to mention (probably the most important bit!) was that I ground a small flat on the tube (about 3mm wide) to help mate it with the plate.

Tube is 10/12mm, plate is 1.5mm. Its pretty thin, and I did have some "bendage" which I wasn't that happy about. Should have used at least 2mm with hindsight.

03-16-2004, 12:06 PM	#11
lolito_fr Cooling Savant Join Date: Dec 2003 Location: France Posts: 291	Thanks Something I forgot to mention (probably the most important bit!) was that I ground a small flat on the tube (about 3mm wide) to help mate it with the plate. Tube is 10/12mm, plate is 1.5mm. Its pretty thin, and I did have some "bendage" which I wasn't that happy about. Should have used at least 2mm with hindsight.