Pro/Forums - View Single Post - What color should I paint my external W/C Box?

Gulp35 · 03-16-2004, 02:20 PM

I have been tring to get my watercooling setup, setup for a LONG time now and I am Very close.

I have all the parts and have laid them out, but I want it to look good as well so i was going to paint the MDF box that I made to house the W/C setup (which is currently holding me back)
I want to finish the project and get back to O/Cing, but I am unable to make a descision

Please make suggestions on what color would go well with a PC60 with red lights.

Here are my current options (not final)
Silver,
Black,
White,
Clear Coat of Epoxy (slightly yellow when very thick)

Thanks for the help

03-16-2004, 02:20 PM	#1
Gulp35 Cooling Savant Join Date: Sep 2002 Location: Atlanta, GA Posts: 135	What color should I paint my external W/C Box? I have been tring to get my watercooling setup, setup for a LONG time now and I am Very close. I have all the parts and have laid them out, but I want it to look good as well so i was going to paint the MDF box that I made to house the W/C setup (which is currently holding me back) I want to finish the project and get back to O/Cing, but I am unable to make a descision Please make suggestions on what color would go well with a PC60 with red lights. Here are my current options (not final) Silver, Black, White, Clear Coat of Epoxy (slightly yellow when very thick) Thanks for the help __________________ Epox 8RDA+ v1.1----------Tyan K8SDPro 1700+ JUIHB 0310XPMW (12.5x200Mhz@1.792v)--------2xOpteron246 (2Ghz 1MB L2) 2x256MB Kingston PC3000 (BH5?) 2-2-2-8 2.7v---2x512MB Corsair Reg.&ECC PC3200 ATi Radeon 9800Pro (stock, too hot)-----ATI RageXL WD800JB+WD2500JB-------WD1600JD Sony DVD/CDRW-------NEC 3520A Black Forton350W--------Antec TruePower2.0 550W EPS12v