good points pelle76 (IMO)...
if you go to the thread i linked to over @ OC, you will see the layout of the res i made. (where the ins/outs are) you'll also notice that the water going into the "hot loop" is coming straight out of the rads (coldest place) this way, the "mixed temp" water is going back into the rads, and the "coldest water" is going to the CPU...(well, pump then cpu)
i understand the possible "gains" in temp arnt earth shattering here, but were fighting for every -1C we can get...right?
__________________
JoeCamel is F@H for ....A CURE!! (40+ GHz)
A64 Phase cooled:
FX-55 @ 3204MHz (267x12) - MSI Neo2 - MachII - OCZ DDR Booster & VX @ 3.6V , 267 @ 2,2,2,5 1:1 - x800 XT-PE @ 665/608 - DD Maze4 with 172w TEC 14V TEC PSU - 500W X-Connect PSU
A64 Water cooled:
3500 Venice @ 3000MHz (300x10) - DFI LP Ultra-D - Storm G5, D4 pump @ 16V, BIXII, 4x100+ CFM fans - OCZ VX @ 3.6V , 300 5:6 = 250 @ 2,2,2,6 - x850 XT @ 600/630 - socket A HSF & 80mm Tornado , copper mem sinks - OCZ 600W PSU
|