had a thought for you.
but what if... you take the line out of the resevior to a pump, then you go to the PC, do all that cooling, then you come out, and you have a Y. but not like you think, on the 2 inlet side you have one from the PC. then the other comes straight from the resevior. after the Y is larger piping than before(2x maybe?) followed by another pump that is stronger as you wanted, sucking not only the water through the pc, but sucking additional water to fill the larger line, like if your PC had 3/8" piping, go to 3/4" piping after the Y. that way the pump fills the line with resevior water, and you can use the second larger pump to blast it through the radiator.
this gets the hot and cold water mixed in a smaller area(no chance of developing hot and cold spots in the resevior) you get the hotter water temp in the radiator atleast partially. and with the larger pump coming second, sucking additional water from the resevior, you get the 2xflow you were talking about.
|