Pro/Forums - View Single Post

Joe Camel · 03-31-2004, 01:07 PM

deep breathes...(stop laughing bill)

my friend, i was not ass-u-ming anything. (reference dual pump thread)
obviously you have some knowledge of this subject since you knew the wattage of the pelts you were (are) going to use.

i am NOT the definitive source on pelts. in fact, i went thru what you are going thru about 3 months ago. i was just sharing my experience with the subject. here are a few threads of me stumbling thru the learning process:

http://www.ocforums.com/showthread.p...hreadid=259765

and,

http://www.ocforums.com/showthread.p...hreadid=257143

OC.com has some good stuff (IMO). although it is not PROcooling, there are still good and helpful people there with much info to be shared...

i hope these threads and another source for info helps you.

GOOD LUCK

PS i understand the "lack" of updated info on pelts, i did about a week of reading (learning) b4 i made this jump. i dumped this whole thing after i saw my elec. bill for the first 2 months. o-well live and learn

(FS/FT everything i listed in DIY thread)

03-31-2004, 01:07 PM	#6
Joe Camel Cooling Neophyte Join Date: Mar 2004 Location: ohio Posts: 51	deep breathes...(stop laughing bill) my friend, i was not ass-u-ming anything. (reference dual pump thread) obviously you have some knowledge of this subject since you knew the wattage of the pelts you were (are) going to use. i am NOT the definitive source on pelts. in fact, i went thru what you are going thru about 3 months ago. i was just sharing my experience with the subject. here are a few threads of me stumbling thru the learning process: http://www.ocforums.com/showthread.p...hreadid=259765 and, http://www.ocforums.com/showthread.p...hreadid=257143 OC.com has some good stuff (IMO). although it is not PROcooling, there are still good and helpful people there with much info to be shared... i hope these threads and another source for info helps you. GOOD LUCK PS i understand the "lack" of updated info on pelts, i did about a week of reading (learning) b4 i made this jump. i dumped this whole thing after i saw my elec. bill for the first 2 months. o-well live and learn (FS/FT everything i listed in DIY thread) __________________ JoeCamel is F@H for ....A CURE!! (40+ GHz) A64 Phase cooled: FX-55 @ 3204MHz (267x12) - MSI Neo2 - MachII - OCZ DDR Booster & VX @ 3.6V , 267 @ 2,2,2,5 1:1 - x800 XT-PE @ 665/608 - DD Maze4 with 172w TEC 14V TEC PSU - 500W X-Connect PSU A64 Water cooled: 3500 Venice @ 3000MHz (300x10) - DFI LP Ultra-D - Storm G5, D4 pump @ 16V, BIXII, 4x100+ CFM fans - OCZ VX @ 3.6V , 300 5:6 = 250 @ 2,2,2,6 - x850 XT @ 600/630 - socket A HSF & 80mm Tornado , copper mem sinks - OCZ 600W PSU Last edited by Joe Camel; 03-31-2004 at 01:37 PM.