Quote:
|
Originally Posted by G33k
Looks like quite a high water-copper ratio in that block... interesting  Would you use two or three barbs? |
3 barbs. Middle inlet with a jet, 2 outlets.
Quote:
UberBlue Quit ripping off the RBX and do something original!
j/k
Doing a diamond pin block?
|
The pins are not diamond really. They look as they do in the pic as that is the final pattern. Try to get some betters pics up soon. This is a cross between my Lemon Block, my Lumby Channel block, my #Rotor style Pin block, the white water, the RBX, the Swiftec 5000A and a few new things I havn't seen yet.
This is ment to be my White Water contender. I also have a second version of the top that I don't have the tooling for. More on that later though.
Quote:
Quote:
Originally Posted by |kbn|
For my cpu block Im going to use two layers of plastic for the top. The middle one can join the two outlets for a 1 in 1 out top layer.
Wouldn't that just make the block more restrictive?
|
Yes it would. That will add an extra 90 inside the block. A Y adapter would not. Still would rather it be done inside the block though. Easier to route hose and performance loss should be unoticable.