Pro/Forums - View Single Post

fhorst · 03-31-2004, 11:38 PM

For what I have heard... go with the Mag 350.
The quiet one seems to be not quiet at all, and give more often problems compared to the mag 350.

Submerged is OK for the noise, but your watertemps will rise. The pumps are about 70W
this will give you about 2 degrees extra temp, or you need an extra or larger rad. (depending on your setup) Making the pump "inline" will save you 1.5 degree.

This will be a high flow system, so I guess your blocks and rad are also high flow.

03-31-2004, 11:38 PM	#2
fhorst Cooling Savant Join Date: Oct 2003 Location: Almere, The Netherlands (Europe) Posts: 262	For what I have heard... go with the Mag 350. The quiet one seems to be not quiet at all, and give more often problems compared to the mag 350. Submerged is OK for the noise, but your watertemps will rise. The pumps are about 70W this will give you about 2 degrees extra temp, or you need an extra or larger rad. (depending on your setup) Making the pump "inline" will save you 1.5 degree. This will be a high flow system, so I guess your blocks and rad are also high flow. __________________ If it get's hot, it needs to be watercooled!