Pro/Forums - View Single Post

krazy · 04-01-2004, 09:34 AM

Interesting leak. The pump must be sucking the pressure right out of the loop by the placement of the hole or something.

I would highly recommend a Mag 3 instead of the Mag 5. The 5 is slightly more powerful, but it puts out a lot more heat than the 3, so you're just better off with the model 3 unless you really have a need for serious pumping power, and then I think a different solution would be better.

I've been using a Mag3 for over a month now and it runs great for me.

04-01-2004, 09:34 AM	#3
krazy Cooling Savant Join Date: Mar 2003 Location: St. Paul, Minnesota, USA Posts: 123	Interesting leak. The pump must be sucking the pressure right out of the loop by the placement of the hole or something. I would highly recommend a Mag 3 instead of the Mag 5. The 5 is slightly more powerful, but it puts out a lot more heat than the 3, so you're just better off with the model 3 unless you really have a need for serious pumping power, and then I think a different solution would be better. I've been using a Mag3 for over a month now and it runs great for me. __________________ Abit NF7-S ... xp1800+ ... Abit GF4ti4200 ... Maxtor 120gb SATA150 Currently gathering parts to water cool everything! (read about the project)