Pro/Forums - View Single Post

Joe Camel · 04-10-2004, 05:17 PM

the evolution continues....

GONE are the (3) 120mm Nidec's (LOUD)
IN are the (4) Torin blowers. (@24V)

GONE is the Little Giant (Mag4ish)
IN is the Laing D4. (@12V...16V PSU didnt come yet.)

GONE are the 2 diff rads.
IN are the 2 (WA2's) rads.

temps have only gone down 1C...

but the TIM is only 20 min old.

all in all im less than impressed, i was hoping for better performance. But on the noise side...i can hear my SmartFan2 on my "air rig" again so for that alone, i am VERY HAPPY!!

EDIT: i may look like the blowers are taped in, but there are 4 screws per blower under the tape

(yes, thats ALL 5/8" tube and barbs)

04-10-2004, 05:17 PM	#61
Joe Camel Cooling Neophyte Join Date: Mar 2004 Location: ohio Posts: 51	the evolution continues.... GONE are the (3) 120mm Nidec's (LOUD) IN are the (4) Torin blowers. (@24V) GONE is the Little Giant (Mag4ish) IN is the Laing D4. (@12V...16V PSU didnt come yet.) GONE are the 2 diff rads. IN are the 2 (WA2's) rads. temps have only gone down 1C... but the TIM is only 20 min old. all in all im less than impressed, i was hoping for better performance. But on the noise side...i can hear my SmartFan2 on my "air rig" again so for that alone, i am VERY HAPPY!! EDIT: i may look like the blowers are taped in, but there are 4 screws per blower under the tape (yes, thats ALL 5/8" tube and barbs) __________________ JoeCamel is F@H for ....A CURE!! (40+ GHz) A64 Phase cooled: FX-55 @ 3204MHz (267x12) - MSI Neo2 - MachII - OCZ DDR Booster & VX @ 3.6V , 267 @ 2,2,2,5 1:1 - x800 XT-PE @ 665/608 - DD Maze4 with 172w TEC 14V TEC PSU - 500W X-Connect PSU A64 Water cooled: 3500 Venice @ 3000MHz (300x10) - DFI LP Ultra-D - Storm G5, D4 pump @ 16V, BIXII, 4x100+ CFM fans - OCZ VX @ 3.6V , 300 5:6 = 250 @ 2,2,2,6 - x850 XT @ 600/630 - socket A HSF & 80mm Tornado , copper mem sinks - OCZ 600W PSU