Pro/Forums - View Single Post

KevC · 04-13-2004, 08:35 PM

Wow, that's so neat! I want to do that

Wait, so my friend tells me "bleeding" is much faster with a reservoir... I don't even know how to set it up, let alone know how to go about "bleeding" and etc.

I should use a car heatercore, right? It's cheaper and bigger than the stuff you can get built for watercooling? What's a BIX?

If I make my own reservoir like that UnloadeD guy... I don't need that Swiftech FBK525 fill & bleed assembly. Eh?

Hmm...

//edit: Alright. This is what I'm thinking of right now:

Swiftech MCW5002A CPU Water Block for AMD $75.00
Swiftech MCP600 12 Volts Industrial Pump $99.00
CLEARFLEX 1/2" ID Flexible Tubing - PER FOOT $2.49x12=$36
Swiftech Power Relay Switch Kit $14.50
Home Depot Hose Clamps $1x?
AD 1/2" Stem to 1/2" ID Hose Barb Adapter - Swiftech $5x?
Radiator $?
2xPanaflos 120mm ~$50
Empty Vodka Bottle... .$?

Am I missing something? What are the barbs for? Sticking in the vodka bottle for the reservoir? Anything else? How about the Hose Clamps? Where do they go?

Thanks

04-13-2004, 08:35 PM	#5
KevC Cooling Neophyte Join Date: Apr 2004 Location: University of Toronto Posts: 7	Wow, that's so neat! I want to do that Wait, so my friend tells me "bleeding" is much faster with a reservoir... I don't even know how to set it up, let alone know how to go about "bleeding" and etc. I should use a car heatercore, right? It's cheaper and bigger than the stuff you can get built for watercooling? What's a BIX? If I make my own reservoir like that UnloadeD guy... I don't need that Swiftech FBK525 fill & bleed assembly. Eh? Hmm... //edit: Alright. This is what I'm thinking of right now: Swiftech MCW5002A CPU Water Block for AMD $75.00 Swiftech MCP600 12 Volts Industrial Pump $99.00 CLEARFLEX 1/2" ID Flexible Tubing - PER FOOT $2.49x12=$36 Swiftech Power Relay Switch Kit $14.50 Home Depot Hose Clamps $1x? AD 1/2" Stem to 1/2" ID Hose Barb Adapter - Swiftech $5x? Radiator $? 2xPanaflos 120mm ~$50 Empty Vodka Bottle... .$? Am I missing something? What are the barbs for? Sticking in the vodka bottle for the reservoir? Anything else? How about the Hose Clamps? Where do they go? Thanks __________________ Dell 600m \| DFI NFII Ultra Infinity Banias@1400MHz \| Thoroughbred@?MHz : Vantec VA4-C7040 (Aeroflow) : Arctic Silver 3 1024@266MHz unknown timings \| Kingston ValueRAM 1024MB@400MHz 3-3-3-11 Hitachi DK23EA-30 (30GB 4200RPM) \| Seagate ST380021A (80GB Barracuda IV) Toshiba SD-C2612 (DVDROM) \| Pioneer DVD-105S : LiteON LDW-851S (8X DVD±R/W) 64MB ATi Mobility Radeon 9000 \| 128MB Gainward Ti4600 Golden Sample 14.1" SXGA+ @ 1400x1050x32 (obviously) \| 17" Hansol 710D @ 1280x960x32@85Hz Last edited by KevC; 04-13-2004 at 09:09 PM.