sandman i won't pretend i'm a master at water cooling i have only done a custom CPU which is very simple and a hard drive sooler, i'm planning on doing the other once i finish uni in a few weeks.
With the psu, from looking at one the other day, the heatsinks are only screwed into place. Before you do any work to them unscrew all the mosfets and the heatsink from the board then cut it. this also mean that you will have more room to work.
Be carful when taking a PSU apart if it is still in the computer turn the comp on and then turn is off from the fall to help drain the PSU and thn leave the PSU for a good 24 hours unpluged from the wall. I would still leave it pluged into a motherboard so it can drain quicker
Buzz
|