Quote:
|
Originally Posted by zer0signal667
What is the recommended curing time for the RTV sealant? It should say on the tube... Keep in mind that curing time will vary with temperature, and if it's not warm enough then it will take very long or may not cure at all.
|
24hrs usually. Dosn't need to cure to be water proof though. The biggest concern is getting the top mounting screws close enough together to apply a nice even pressure across the block top. My last few blocks used with silicon just bearly leaked even with NO sealant. I always test run them with no sealant to see where the majority of the water will come out and then if needed add another screw there.
Lately though I have been using nothing but O-rings. Only way to go if your capable of it.