Siavash:
As long as both peices of plastic are the same kind of plastic - - not mismatched like one Polycarb, the other Acrylic. If you use the proper solvent cement it should bond really well, even just a simple butt joint like you proposed, you'll want a really good flat surface on the round tube before you try to join it though.
__________________
"mooooo" said the cow.
ERTW - UBC
P4 2.4B @3.01Ghz 167FSB :: Abit IC7 :: 2x256MB HyperX PC3700 :: ASUS 9600XT :: WD Raptor 2x36GB RAID0
|