Quote:
|
Originally Posted by Lothar5150
BlackStealth- My Company makes the Coolingworks Chevette Shroud. Unfortunately, you got oddball core. The shroud size is listed so that you can make sure the shroud will fit the core you have before you buy it. I’d recommend you return your core to the auto parts store and ask the auto parts guy if you can measure a few different Chevette cores and exchange it for one that is the standard size- 6 1/8 x 6 1/8.
email me at info@coolinworks.com if you need some help or have any questions. |
Thank You Lothar for the reply. The shrouds you make are great and well built; I encourage anyone to look forward into them. I know that the sizes were listed on the website, what fooled me was that I saw that it will fit the Chevy Chevette so I really didn’t take the measurements into consideration. I had in mind that I had the right HC. After realizing that the shroud didn’t fit I researched and found out that there are different sizes of Chevette HC that are made my different manufactures. I don’t think I can return the HC now because I sanded it and prepared it for painting, so I guess I just have to order the right HC or go with D-TeK JR-120. Will the shroud fit the JR-120? What do you recommend me doing? The right HC will cost $39.45 with shipping; I could also go to Auto Zone and check out if they have different sizes, which would be cheaper if I can get a hold of it. If you can please advice me on what would be the best dissension.
Thank You,
ALi