Pro/Forums - View Single Post - Will I notice a difference if I add another h/c to my current setup?

j3rkoff · 05-16-2004, 11:19 AM

I currently only run the cpu block (maze 4), mag 3, and one heatercore, approx. 9.5x6.5, with four sunon 84 cfm fans on push-pull in a 15"x9"x9" box i made for it all. I was planning on adding a gpu block, and redesigning the box, with a 1" shroud for the fans on either side, and i make it so an identical heatercore could be mounted on the opposite inside wall of the box. Would this help my temps any? I'm currently getting 38-44c on just water, and 13-20c with the pelt. I don't have any means of measuring water temps right now, ambient stays cool at 75f/24c, but will another heatercore help overall temps any? :shrug:

05-16-2004, 11:19 AM	#1
j3rkoff Cooling Neophyte Join Date: Aug 2003 Location: AZ Posts: 50	Will I notice a difference if I add another h/c to my current setup? I currently only run the cpu block (maze 4), mag 3, and one heatercore, approx. 9.5x6.5, with four sunon 84 cfm fans on push-pull in a 15"x9"x9" box i made for it all. I was planning on adding a gpu block, and redesigning the box, with a 1" shroud for the fans on either side, and i make it so an identical heatercore could be mounted on the opposite inside wall of the box. Would this help my temps any? I'm currently getting 38-44c on just water, and 13-20c with the pelt. I don't have any means of measuring water temps right now, ambient stays cool at 75f/24c, but will another heatercore help overall temps any? :shrug: __________________ Currently using one large rad, two gallons of coolant, and two 13.5 inch fans to cool my car's engine.