Thread: pump cooling?
View Single Post
Unread 05-30-2004, 03:10 AM   #21
Joe Camel
Cooling Neophyte
 
Joe Camel's Avatar
 
Join Date: Mar 2004
Location: ohio
Posts: 51
Default

Quote:
Originally Posted by redleader
Any reason you don't just improve your radiator? If its performance was already so marginal that adding 10 or 20 (or even more) watts from the pump is hurting CPU temps, you'd probably do well to get a bigger radiator regardless.

hummm, i think 2x Fedco 2-342's (single pass) heater cores, in series, with a 540cfm dual blower is about as good as it gets...yes?

this is more about squeezing EVERY last .1C out of the loop. also... im (nuts ) running 2x of these pumps (series) thru the WB (only) and 1 Rio 2100 pumping thru the rads (only) both empty into a common (custom) res...its a LONG story... :shrug:

here is a quick pic of the (latest) layout: (the "test pump" is hard to see but its in there. ill be drilling the 2nd soon )




lid on...comp sits on the lid






PS im known as the "Ghetto God of Overkill" over on OC.com :shrug:




__________________
JoeCamel is F@H for ....A CURE!! (40+ GHz)

A64 Phase cooled:
FX-55 @ 3204MHz (267x12) - MSI Neo2 - MachII - OCZ DDR Booster & VX @ 3.6V , 267 @ 2,2,2,5 1:1 - x800 XT-PE @ 665/608 - DD Maze4 with 172w TEC 14V TEC PSU - 500W X-Connect PSU

A64 Water cooled:
3500 Venice @ 3000MHz (300x10) - DFI LP Ultra-D - Storm G5, D4 pump @ 16V, BIXII, 4x100+ CFM fans - OCZ VX @ 3.6V , 300 5:6 = 250 @ 2,2,2,6 - x850 XT @ 600/630 - socket A HSF & 80mm Tornado , copper mem sinks - OCZ 600W PSU

Last edited by Joe Camel; 05-30-2004 at 04:40 AM.
Joe Camel is offline   Reply With Quote